Emergency Heating Services in Tulsa, OK

Air Comfort Solutions provides 24-hour emergency heating service to homeowners throughout Tulsa and the surrounding communities. When your heat goes out on a cold Oklahoma night, you cannot wait until morning. Our Tulsa heating team is available around the clock, every day of the year, and we dispatch quickly with fully stocked service vehicles to restore heat to your home as fast as possible.

Tulsa winters can turn severe with little warning. A cold front that pushes overnight temperatures into the teens is not uncommon from December through February, and ice storms can compound the problem by knocking out power and making roads difficult. A heating system failure under those conditions is not just an inconvenience. For households with elderly residents, young children, or medical needs, it becomes a genuine safety situation.

Air Comfort Solutions emergency heating technicians carry a full parts inventory and resolve most emergency repair calls on the same visit. If the system cannot be repaired the same night, we will tell you honestly and discuss options for temporary heat while the repair is scheduled. For non-emergency repairs and annual service, see our heating repair and heating maintenance pages.

Emergency Heating Situations We Respond To

Our Tulsa emergency heating team responds to any situation that leaves your home without adequate heat:

• Complete loss of heat, with furnace or heat pump not producing any warm air
• Furnace that starts and immediately shuts off, failing to complete a heating cycle
• Gas furnace with a confirmed or suspected gas smell near the unit
• Heating system producing cold or lukewarm air only
• Emergency heating failure during extreme cold with temperatures below freezing
• Heat pump locked out and not operating in heating mode
• Carbon monoxide detector alarm triggered in association with the heating system
• Heating system that will not restart after a power outage

If you smell gas near your furnace, do not attempt to restart the system. Leave the home, leave doors open behind you, do not operate any switches or appliances, and call ONG or your gas utility from outside. Once the utility has confirmed it is safe to re-enter, call our emergency line. Our team can inspect the furnace and gas connections and restore safe operation.

What to Do While You Wait

1. Set your thermostat to a lower temperature, around 60 degrees, to reduce the demand on a struggling system if it is still producing some heat.
2. Check your air filter. A severely clogged filter can cause a furnace to overheat and shut down on the high-limit switch. If the filter is black and clogged, replace it and try resetting the system.
3. Check your circuit breaker panel for a tripped breaker on the furnace or air handler circuit. Reset it once if it has tripped, but do not reset repeatedly if it trips again immediately.
4. If you have a heat pump, check that the outdoor unit is not buried in ice or snow. A heat pump with a completely iced-over outdoor coil will not operate effectively.
5. Keep interior doors closed to retain warmth in the rooms you are using while you wait for service.

Common Emergency Heating Failures We Fix

Ignition Failure

Gas furnaces with hot surface igniters or spark igniters can fail, leaving the furnace unable to light the burner. We carry replacement igniters for all major furnace brands and replace them on the same visit in most cases.

Limit Switch Lockout

When a furnace overheats, the high-limit switch shuts it down to prevent damage. The furnace will not restart until the switch is manually reset, but resetting it without finding the cause of the overheat, like a clogged filter, blocked vents, or failing blower, will result in another lockout. We find the root cause, not just reset the switch.

Control Board Failure

The control board manages the furnace’s operating sequence. A failed board can cause a range of symptoms including no operation, partial operation, or erratic cycling. We diagnose board failures and carry replacement boards for common furnace models.

Heat Pump Reversing Valve Failure

A heat pump that is blowing cold air in heating mode may have a failed reversing valve. The component that switches the refrigerant flow direction between heating and cooling. This is a more involved repair but one our heat pump technicians are trained and equipped to handle.

Gas Valve Failure

A gas valve that has failed closed will leave the furnace unable to produce heat even when the igniter and blower are operating normally. We diagnose gas valve failures and replace them on the same visit.

After the Emergency: Preventing the Next One

Most heating emergencies are not random failures. They are the result of developing issues that were never caught. After we restore heat to your home, we will give you an honest assessment of your system’s overall condition and let you know if there are other components that should be addressed before next season. Scheduling annual heating maintenance every fall is the single most effective way to catch those developing issues before they become a 2 AM repair call.

Why Tulsa Homeowners Choose Air Comfort Solutions for Emergency Heating

• Available 24 hours a day, 7 days a week, 365 days a year
• NATE-certified technicians dispatched to every emergency call
• Fully stocked service vehicles for same-visit repairs in most cases
• Honest assessment of both the immediate problem and underlying causes
• Upfront pricing before any non-emergency work begins
• 15-plus years serving Tulsa and surrounding communities
• Satisfaction guaranteed on every job

Serving Tulsa and Nearby Communities

Air Comfort Solutions provides 24/7 emergency heating service throughout Tulsa and the surrounding area, including Broken Arrow, Bixby, Jenks, Owasso, Sand Springs, Sapulpa, Claremore, and nearby communities.

Frequently Asked Questions