Slab Leak Detection & Repair in Oklahoma City, OK

Air Comfort Solutions provides slab leak detection and repair for homeowners throughout Oklahoma City and the surrounding communities. A slab leak, or a leak in the water supply or drain lines running beneath your home’s concrete foundation, is one of the more serious plumbing problems a homeowner can face. Left undetected or unrepaired, slab leaks cause significant structural damage, mold growth, and steadily climbing water bills. Our licensed OKC plumbers locate slab leaks accurately and repair them with minimal disruption to your home.

Oklahoma City’s expansive clay soil creates particularly challenging conditions for under-slab plumbing. The soil expands when wet and contracts during dry periods, and Oklahoma’s alternating wet springs and dry summers mean that cycle repeats year after year. That movement stresses the copper and galvanized steel supply lines that run beneath many OKC-area slab foundations, eventually causing pinhole leaks and pipe failures at fitting joints. Homes built in the 1960s through 1980s, which make up a significant share of OKC’s housing stock, are most likely to have original copper lines that have been subjected to decades of that soil movement.

The challenge with slab leaks is that most of the damage happens before the homeowner knows there is a problem. Water migrates through concrete and soil, sometimes for weeks or months before showing up as a wet floor, a hot spot, or an unexplained spike in the water bill.

Signs of a Slab Leak

Slab leaks rarely announce themselves directly. These are the signs that typically indicate a leak beneath the foundation:

• Water bill that has increased significantly without a change in usage
• The sound of running water when all fixtures are turned off
• Warm or hot spots on the floor, particularly on tile or hardwood
• Damp, wet, or soft areas on the floor
• Mold or mildew smell without a visible source
• Cracks appearing in walls or flooring
• Water pooling at the base of a wall or near the foundation
• Reduced water pressure throughout the home

How We Detect Slab Leaks

Accurate slab leak detection minimizes the amount of concrete that needs to be opened. Air Comfort Solutions uses non-invasive detection methods to locate the leak precisely before any cutting or drilling begins:

Electronic Leak Detection

We use electronic amplification equipment that detects the sound of water escaping under pressure through a pipe. By listening at multiple points, we triangulate the leak location to within a few inches, allowing us to open only a small area of concrete for repair access.

Pressure Testing

Isolating sections of the supply system and pressure-testing them confirms which line is leaking and helps narrow the location before acoustic detection. This step also confirms that the repair was successful after completion.

Thermal Imaging

For hot water line leaks, infrared thermal imaging identifies temperature differentials on the floor surface that indicate where heated water is migrating beneath the slab. This method is particularly effective for locating hot water slab leaks quickly without any disturbance to the floor.

Slab Leak Repair Options

Once the leak is located, we discuss the repair options with you. The right approach depends on the leak location, the pipe’s overall condition, and your home’s layout:

Direct Access Repair

For a single, clearly located leak in an otherwise sound pipe, direct access repair involves opening a small section of the concrete slab directly above the leak, making the repair, and patching the concrete. This is the least invasive option and the fastest to complete.

Pipe Rerouting

If the leaking pipe is in a difficult location for direct access, or if the pipe’s overall condition suggests additional leaks are likely, rerouting runs a new supply line through the walls or attic rather than beneath the slab. This eliminates the under-slab pipe from service entirely and removes the possibility of future slab leaks from that line.

Epoxy Pipe Coating

For certain pipe configurations, epoxy lining rehabilitates the interior of the existing pipe without excavation. This is evaluated on a case-by-case basis. If your home’s overall plumbing condition suggests broader deterioration, we may also recommend discussing full repiping as a long-term solution.

Why Oklahoma City Homeowners Choose Air Comfort Solutions

• Licensed, insured plumbers with slab leak detection equipment
• Non-invasive detection before any concrete is opened
• Honest assessment of repair options with real cost comparisons
• Upfront pricing before any work begins
• Permit handling on all applicable repair work
• 15-plus years serving Oklahoma City and surrounding communities
• Satisfaction guaranteed on every job

Serving Oklahoma City and Nearby Communities

Air Comfort Solutions detects and repairs slab leaks throughout Oklahoma City and the surrounding area, including Edmond, Norman, Moore, Yukon, Mustang, and nearby communities.

Frequently Asked Questions